INSTRUCTIONS FOR USE
Product: Meister fein Chronoscope MEGA Solar
A few words before you start your watch
In purchasing the Connected radiocontrolled watch with
solar power, you have acquired a timepiece that offers you
the latest technology with very simple operation. Once it is
activated by receiving the radio signal sent by a time signal
transmitter or by using the Junghans MEGA app it will be a
trusted assistant to have on your wrist. It only needs 2 min
utes of sunlight a day to display the time reliably.
We hope you enjoy your Junghans!
Uhrenfabrik Junghans GmbH & Co. KG
Contents:
1. Starting your watch
2. Displays.
3. Operation:
4. Stop function
5. Setting the time
6. Adjusting the time zone using the crown
6.1. Setting in hourly increments
6.2. Adjusting all known time zones
7. Synchronisation using the
7.1. Junghans app
7.2. Radio signal
8. Information on solar technology
8.1. Charge level indicator
8.2. Automatic energy saving mode
9. General information
10. Technical information
11. Water resistance
12. Frequently asked questions
1 . Starting your watch
2 . Displays
The watch has two display modes:
Time display
Stop function (chronoscope)
Date display
Seconds display
Stop function:
60seconds
counter
Calibre: J110
For energysaving reasons,
your watch is set to the
1
"Chronograph" mode.
Press the lower button 2 to
switch to the time display.
2
The date and seconds are then
displayed in the totalisers.
Stop function:
60minute counter
Button 1
A B C
Button 2
Reception mode:
received time signal
3 . Operation
Button 1:
• Change to
• Stop times
Button 2:
• Reception mode
• Manual time synchronisation
• Change to time display
(End stop function)
• Add stop times
4 . Stop function (chronoscope)
Maximum stop time: 60 minutes, with automatic
Stop times:
Changing from time display to stop function
(chronoscope mode)
Note: You can start the starting process immediately, even
if the hands have not yet reached the start position.
Starting the timer:
Setting zero position display:
Addition timer:
Crown
positions
stop function
Chronostop after stop times of 60
minutes
Minutes, ½ second
• Press button 1 briefly to change to the
stop function.
• The stop second hand and the stop
minute hand move to the start posi
tion (12 o'clock).
• Start the chronoscope by pressing
button 1.
• Stopping the timer:
Stop the chronoscope by pressing
button 1 again.
Press button 2.
This returns all stop displays to their
zero position.
• You can add stop times by starting the
stop function and then pressing button 2.
The split time is displayed (the stop func
tion continues to run in the background).
Press button 2 again to continue the stop
function.
• You can repeat this process as often as you
want.
Pull the crown
and then return
it to position A
= cancels the
function/setting
5