Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the filter pump
An additional filter pump can be connected to the leadthrough G2 using a 50 mm hose sleeve.
Hand-tighten the bolt connections.
Connect the filter pump as described in the operating manual.
Outlets
Connecting the return flow to the pond
Connect suitable pipes to the outlets DN 110 for the return flow to the pond, provided you are not us-
ing an additional filter module.
Do not use any right-angled bends. Bends with a maximum angle of 45° are efficient.
Glue plastic pipes in place to ensure a permanent and reliable joint or use longitudinally force-
locked sleeve joints.
EN
Proficlear0346
Proficlear0343
53
Publicidad
