Control system
Suspended installation of the control system
Install the control system at a minimum distance of 2 m from the pond.
Protect the control system from direct sun radiation.
The control system is splash-proof and may be exposed to rain.
How to proceed:
1. Either attach the control system and the OASE Control Box to the container wall or use the
threaded hooks to mount it in a different position.
2. Connect the two plastic caps with the cap nuts when fastening the OASE Control-Box on the con-
tainer wall.
– The plastic caps hold the OASE Control-Box in place.
Connecting the control system
The cable harness contains the connection cables of the signal box and the drum motor. The OASE
Control-Box is firmly connected to the control system.
Connect the two connection cables with the corresponding sockets on the control system.
The connections are designed to prevent reverse polarity.
Hand-tighten the cap nuts.
56
Proficlear0349
Proficlear0348