Publicidad
Idiomas disponibles
Idiomas disponibles
HYDROMASSAGE FUNCTIONS
"On/Off"
Select this option (press ENTER) to initiate the Scottish shower function or finish it if
working.
The Scottish shower function may be started if the hydromassage function is working.
The beginning of the cycle is indicated by the counting down of a Timer on the screen
according to the pre-set duration.
"Timer of the hot water function"
Parameter of variable functioning in a 1 – 9
seconds interval which represents the time the hot
water is running.
"Timer of the cold water function"
Parameter of variable functioning in a 1 – 9
seconds interval which represents the time the cold
water is running.
Note:
The two previous parameters have minimum variations of 0,5 seconds.
"Timer of the Hydromassage Function"
Parameter of variable functioning in a 5 – 60 minutes interval which represents the
duration of the hydromassage function (except if changed).
11:47
Lenght
NOTE:
Changing a parameter when the hydromassage is working is considered a temporary
variation, which means it isn't saved. When the hydromassage is turned off, the pre-set
duration is reestablished. To permanently change the duration, make all the changes
while the hydromassage is off.
58
05/05
12:04
Scottish
Lenght
21:00
Hydro On
11:47
ON Warm
11:47
ON Cold
01/02
12:03
Hydro On
Hydro Paus
9.0s
Hydro On
9.0
Hydro Paus
02/03
On/Off
Lenght
Lenght
9.0s
9.0
03/03
Lenght
Lenght
9.0s
9.0
01/02
Hydro On
Hydro Paus
2.0s
0.0s
Publicidad
