Publicidad
Idiomas disponibles
Idiomas disponibles
HYDROSAUNA FUNCTIONS
"Function "Timer"
Working parameter of variable functioning in a 5 – 60 minutes interval which represents
the sauna cycle duration after reaching the set temperature.
NOTE:
Changing a parameter when the sauna is working is considered a temporary variation,
which means it isn't saved. When the steam bath is turned off, the pre-set duration is
reestablished. To permanently change the duration, make all the changes while this
function is off.
"Function "Temperature"
A temperature between 30º and 50ºC may be set once the defined temperature is
reached.
"Anticalcium"
function is used to clean the tank limescale, formed
during its functioning. After working several hours
(depending on the hardness of the water – see table) a
message indicating the need of cleaning is shown on
the screen so as to keep the working efficiency of the
device.
Press the ENTER key in this option to see the
submenu "anticalcium"
"Anticalcium confirmation"
In the information area of the screen it is possible to
check the working number of hours of the tank.
12:05
(0)
On/Off
Lenght
Temp.
Lenght
60:00
12:05
(0)
03/04
Lenght
ºC
Temp.
Anticalci
Lenght
59:00
02/04
12:05
Lenght
60
12:05
ºC
Lenght
25
12:06
Time
12:06
Time
(0)
02/04
On/Off
Lenght
Temp.
05:00
05
(0)
03/04
Lenght
Temp.
Anticalci
59:00
50
01/01
On
000
(0)
01/01
Confirm
000
61
Publicidad
