Important Safety Information - Winkhaus blueMatic EAV Instrucciones De Montaje

Installation, Operating and
Maintenance Instructions
EN

1.5 Important safety information

1
Safety information described in this section is to be diligently adhered to
regarding the installation and use of this security lock blueMatic EAV!
You must heed to the safety information provided without exceptions!
• Read the installation, operating and maintenance instructions it easily
accessible for future reference. After installing the door pass it on to the end
customer.
• The manufacturer shall not be held liable for damage caused by use contrary
to the intended purpose of the product.
• For security reasons, the lock has been designed to be used in conjunction
with genuine Winkhaus parts. Using other parts may adversely affect the
given properties of the security lock.
• It must be ensured that the door can be closed / unlocked without any
problems by the key.
• Installation / repair of electrical equipment requires expertise, thus such work
should only be carried out by a qualified electrician.
• Arbitrary modifications, changes or makeshift repairs are not permitted
due to concerns for safety. You must only use genuine Winkhaus parts for
replacements.
• The manufacturer shall only be held liable for security related properties of
the locking system as stipulated within the bounds of statutory regulations, if
the manufacturer himself or another instructed, authorized agent has carried
out the maintenance and service work or made the changes.
• Winkhaus does not accept liability for any type of damage caused by
inadequate repair, modification or maintenance works made.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
Caution! The wiring / cable transitions must be installed in the
safe area (e.g. installed concealed in the airgap) and protected
against manipulation.
10 5044744