Cable Transition T-Kü-T1 Ft (Sash- & Frame Part) - Winkhaus blueMatic EAV Instrucciones De Montaje

Installation, Operating and
Maintenance Instructions
EN
3
3.2 Cable transition T-KÜ-T1 FT (sash- & frame part)
Recommendation: It is recommended always that the cover plate
on the faceplate and the material type of timber, PVCu / plastic or aluminum)
conceals the routing for the required cable reserves to prevent possible cable
damage.
For hollow chamber / cable reserve in timber front doors, mill out pocket of
approx. 50 mm x 95 mm.
Installation sequence
Figure 3.2-1: T-KÜ-T1 FT with cover plate and frame part 1
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
Notice:
a) The routing for the main lock housing must be 16 mm as
minimum to provide for free motion of the drive rod! Check
the door eurogroove for sprue so that the free motion of the
rod is not impeded!
b) It is imperative to use always with a lever/fixed pad handle
set (lever inside, door knob outside)
38 5044744
(depends
Sash part
Frame part 1
Frame part 2
Cover strip
T-ABDECKUNG
KÜ-T1 RT R8
Cover plate
(F16 = L 126 mm R8;
F20 = L 130 mm R10;
F24 = L 134 mm square)
Screw M3 x 12
(includet in delivery
from cover plate)
Fitting screw
(includet in delivery
T-KÜ ... sash part)