Cable Transition Frame Part For T-Kü-T1; Cable Transition Frame Part For External Power Supply; Cable Transition Frame Part For Frame Power Supply - Winkhaus blueMatic EAV Instrucciones De Montaje

Installation, Operating and
Maintenance Instructions
Part Description (see also Figure 3.2)
T-ABDECKBLECH KÜ-T1 FT F24 KANT MC
Cover plate for sash, flat faceplate 24 mm, square, length 134 mm,
suitable for ALU (PVCu if necessary)
T-ABDECKBLECH KÜ-T1 RT F24 X 350 MC
Cover plate for frame, flat faceplate 24 mm, angulate, square, length 350 mm,
suitable for ALU (with fitting groove 24 mm), suitable for example for heroal
D92 UD
Cable transition frame part for T-KÜ-T1

Cable transition frame part for external power supply

Cable transition frame part for frame power supply

Notice: If no separable cable transition (e.g. T-HT KÜ M1188) or
no Winkhaus cable transition is used, then the cable "T-HT
CONNECTION CABLE 6 M FOR MOTOR" for motor housing
(2522881) must be used.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
Frame part with 4 m cable and cable end sleeves
(6 wires)
T-KÜ-T1 RT KABEL 4M
Frame part with 0.6 m cable and plug for frame
power supply inclusive cover strip STV-KÜ-T1
RT R8, to cover the profile hole on the frame
side
T-KÜ-T1 RT KABEL 0,6M RNT
31 5044744
Art.-No.
5018556
5028782
5040503
5040504
EN
2