Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting to the drain
The drain hose can be installed in two different ways:
Method No. 1: Position the hose over the edge of a sink using a special "U" device
(not supplied). The elbow should be placed at a maximum distance of 100 cm from the
ground.
Method No. 2:Fix the end of the drain hose to the drain: the drain pipe must be at least
50 cm and not more than 85 cm above the ground and must not extend more than 2.5
metres.
CAUTION:
•
Your house will be flooded if the drain hose comes out of its housing when draining.
•
There is a risk of burns from the high washing temperatures! Fix the drain hose
securely in order to prevent such situations and ensure that the washing machine
takes in and drains water without issue.
•
If the drain hose is raised after its installation, it becomes harder for the water to drain,
and the laundry may be considerably wetter. This is why the heights set out in the
diagram must be respected.
•
To prevent the machine from self-siphoning, do not push the hose down to the bottom
of the drain.
48
[or]
Electrical connection
•
Plug your washing machine into an earthed socket that is correctly
installed and connected to the electricity network in accordance with
current standards.
•
This device can only be connected to 220-240V~ 50 Hz single phase
electrical supplies.
•
Before plugging in your appliance, ensure that the voltage in your home matches that
shown on the appliance rating plate. Check that the fuses and the domestic electrical
installation are capable of bearing the load from the appliance (see the appliance
rating plate).
•
Do not use an extension lead or multi-socket adaptor with this appliance.
•
The power cord plug must be easily accessible after the appliance is installed.
•
To avoid electrical risks, if the power cable is damaged, it must be replaced by your
retailer, its after-sale department or a similarly qualified person.
description
Description of the Control Panel
2
1
2.a
1.
Program Selector
Turn the program selector in any direction to select a program or turn the appliance off
(STOP position ).
2.
Temperature selector
Press the button one or more times until you reach the desired temperature.
2a) 20°C, 30°C, 40°C, 60°C and 90°C.
3
10
4
5
6
7
8
9
11
13
6.a
7.a
8.a
3.a
6.b
7.b
8.b
12
14
6.c
8.c
49
Publicidad
