Kenmore 911.47812 Manual De Instrucciones página 17

OPERATION
Clockand Timer
The clock must be set for the correct
time of day before a delayed oven
function can work properly. The time
of day cannot be changed during a
delayed oven function, but can be
changed during a bake or broil
function.
HOW TO SET THE CLOCK
1. Press the CLOCK pad.
2. Press the NUMBER pads to set the
time.
3. Press the START pad.
RECALL THE CLOCK
While using your oven for timed
cooking, press the CLOCK pad if you
wish to check the time of day. The
current time of day will show in the
display.
POWER FAILURE
If you have had a power failure, the
time flashing in the display may be
incorrect. Reset the Clock.
Any oven function that was in process
will need to be reset.
The Kitchen Timer is used to
time cooking processes or other
household activities. It does not
control the oven. It can be set for
up to 9 hours and 59 minutes, It will
count down in minutes until the last
68 seconds is reached, then the
control will beep once. When the
countdown reaches :0, the control will
beep 3 times followed by one beep
every 6 seconds until the HOUR/MIN
KITCHEN TIMER ON/OFF pad is
pressed. This 6-seeend tone can be
canceled. See tones on the following
page,
HOW TO SET THE TIMER
1. Press the HOUR/MIN KITCHEN
TIMER ON/OFF pad.
2. Press NUMBER pads to set time.
3. Press the START pad,
4. When the countdown has reached
zero, press the HOUR/MIN
KITCHEN TIMER ON/OFF pad.
To cancel the timer during the
countdown, press the HOUR/MIN
KITCHEN TIMER ON/OFF pad twice.
17
20P312-2 ENv01