Kenmore 911.47812 Manual De Instrucciones página 30

CAREAND CLEANING
Removable Parts
_ isconnect electrical power
TM
to the oven at the main
circuit breaker or fuse box
before attempting to replace the
oven light bulb. Do not touch a
hot light bulb with wet hands or a
wet cloth. Watt until the bulb Is
cooled end use a dry cloth.
Live Socket
Bulb Collar
TO REMOVE THE COVER
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box.
2, Hold your hand under cover and
firmly twist cover.
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb.
TO REPLACE COVER
1. Place the bulb cover into the
groove of the bulb socket and turn
1/4 turn clockwise.
2. Reconnect the electrical power to
the oven.
For improved lighting inside the oven,
clean the glass cover frequently using
a wet cloth. Caution: This should
only be done when the oven Is
completely cool.
TO REMOVE Bump in
1. Pull the RackGulde I_ /
racks Raised Back _ /
Outto
_ tl_ I_k_
the stop lock position_,_
2. Pull up the front of the rack and
slide under the bump of the rack
guide.
TO CLEAN
Clean with warm water and
' detergent. For hard to remove stains,
gently scrub with a scouring pad or
a soap-filled pad. Rinse well.
Gray porcelain-coated oven racks
may also be cleaned in the oven
during the self-clean cycle, it is
necessary to wipe the edges of gray
porcelain-coated oven racks with a
light coating of vegetable oil after
cleaning. This will help maintain the
ease of sliding the racks in and cut
of the oven.
TO REPLACE
1. Place the raised back of the rack
onto the rack guides.
2. Lift the front of the rack until the
raised back slides under the bump
of the rack guides.
3. Slide the rack all the way back.
30
20P312-2 ENv01