SMA EV CHARGER 7.4 Manual De Operación página 31

SMA Solar Technology AG
6.2 Mounting the Connection Cap
Requirement:
☐ Only use the supplied cable glands.
Procedure:
1. If the AC cable has a diameter of 11 mm to 17 mm, insert the M25 cable gland into the
opening of the terminal cover and tighten.
2. If the AC cable has a diameter of 15 mm to 21 mm,
insert the cable gland extension into the opening of
the terminal cover and tighten. Then insert the M32
cable gland into the cable gland extension and
tighten.
3. Insert the M25 cable gland with bending protection
spiral into the opening of the terminal cover and
fasten it from inside with the counter nut.
4. Put the terminal cover on the enclosure and tighten
the 3 screws loosely in the given order, so that the
terminal cover still has some play (TX20).
Operating manual
6 Electrical Connection
1
2
M32
1
1
3
EVCxx-10-BE-en-11
2
2
31