SMA EV CHARGER 7.4 Manual De Operación página 50

8 Operation
Switching between fast charging and intelligent charging
• Turn the rotary switch on the product so that the
symbol of the required charging mode is visible.
Switch between charging with PV surplus and charging with specified target
1. Open the SMA Energy app.
2. Select [e-mobility] in the lower bar.
☑ Information on the current charging mode is displayed.
3. Select the required charging mode in the drop-down list and make settings if necessary.
8.7 Activating the Charging Release via App
To protect the charging station from unauthorized access, you can lock the charging station with
this function. After activation, the charging station is locked and each charging process must be
released via the SMA Energy App. When charging is complete, the charging station is locked
again.
Procedure:
1. Log into the user interface.
2. Select the menu item Device configuration in the menu Configuration.
3. In the Load settings section, activate the Load release via app field.
8.8 Setting the Brightness of LEDs
You have the possibility to adjust the brightness of the LEDs. By default, the brightness is set to
High.
Procedure:
1. Log into the user interface.
2. Select the menu item Parameter in the menu Configuration.
3. Select the parameter Brightness of LEDs and select the desired brightness in the drop-down
list under Value.
4. Click on Save.
8.9 Deleting the Admin Account
In case the password gets lost, the admin account can be reset and newly created. All system data
will be retained.
50 EVCxx-10-BE-en-11
SMA Solar Technology AG
Operating manual