Fulcrum RACING ZERO DB Manual Del Usuario página 25

®
3.4 - FITTING THE TUBELESS TYRE
In order to properly and safely use Fulcrum rims, a perfect seal must exist between the rim and tire.
While Fulcrum makes no representations about their performance or quality, and is not responsible
for any possible failure of the tire.
TO RECOGNIZE A TUBELESS TYRE, CHECK FOR THE TUBELESS WORDING OR LOGO.
3.4.1 - FITTING THE TUBELESS VALVE
Notes
- The valve is supplied already mounted on the rim.
- Periodically check the seal of the valve and the entire Tubeless system (see section 3.8). To optimise
the seal, we recommend changing the Tubeless valve once a year.
- Use only the original Fulcrum valve: since there are various types of valves available, identify the
correct code for your wheel in the online Spare Parts Catalogue at www.fulcrumwheels.com or contact
a Fulcrum Store or a Fulcrum Service Centre.
- Tighten the valve locknut (A - Fig. 5) only by hand.
3.4.2 - FITTING THE TUBELESS TYRE
WARNING!
Carefully follow the instructions provided by the tubeless tyre manufacturer.
• Check that the inside of the tyre and rim are perfectly clean; clean them with a cloth if necessary.
• Thoroughly wet the tyre bead with a dampened sponge or with a moistener placed (Fig. 6).
6
5
6
A
A