Fulcrum RACING ZERO DB Manual Del Usuario página 29

®
• Inflate the inner tube until the two tyre beads go into place correctly (Fig. 18).
• Deflate the tyre completely and check the correct adherence of the bead around the whole
rim.
If the tyre is not fitted correctly the bead will separate from the tyre if deflated.
• Inflate the tyre again and respect the working pressure.
• Screw back the valve ring
• Put back the valve cap
WARNING!
Also when using an inner tube, proper coupling is absolutely necessary to maintain the
tire or the rim and avoid personal injury or death.
3.7 - REMOVING THE TUBELESS TYRE
WARNING!
Carefully follow the instructions provided by the tubeless tyre manufacturer.
• Deflate the tyre.
• Starting from the point opposite the valve, press one side of the tyre with your hands until
you uncouple the bead from its seat (Fig. 19), making it drop into the rim groove (Fig. 20).
Continue around the whole wheel circumference (Fig. 21).
10
17
19
18
20