Publicidad
Idiomas disponibles
Idiomas disponibles
Note
Detergent must be added in "case I "only after selecting pre-washing for machines with
-
this function.
Make sure that the washing machine is properly installed before use.
-
Washing. Fig. 12
Switch on the device by pressing the On/Off button.
-
Turn the knob to select the desired programme.
-
Select function or use the default one.
-
Press the Start/Pause button.
-
After washing
When the wash cycle is completed, a beep will sound, and the word "END" will be displayed
on the control panel.
Using the washing machine
Before each washing
The washing machine should be operated within a temperature range of 5-40 °C. If
-
used under 0°C, the inlet valve and draining system may be damaged. If the machine is
placed or operated in rooms at 0 °C or below, it should be transferred to normal room
temperature to ensure the water supply hose and drain hose are not frozen before use.
Check the care labels and the product instructions when using detergent before washing.
-
Use non-foaming or less-foaming detergent suitable for machine washing.
Check the label.
-
Empty the pockets of the clothes to be washed.
-
Knot the long strips, close zips, or tighten button.
-
Place small items in washing bags.
-
Turn easy-pilling and long-pile fabrics inside out.
-
Separate clothes with different textures.
-
Note
Washing loose laundry can cause imbalances in the washing machine. It is advisable to add
more laundry to ensure optimum performance (maximum ¾ parts of the drum).
Detergent dispenser tank Fig. 13
1: pre-wash compartment (detergent)
2: softener compartment
3: washing compartment (detergent)
BOLERO DRESSCODE 740/840/940 BI INVERTER A
ENGLISH
79
Publicidad
