I. Installing your appliance
When your appliance is delivered, after unpacking, check the outside for damage (signs of impact, buckling...).
Transport your appliance to its chosen location. This place must:
FI STIR XS XLI SYXWMHI XS EPPS[ WYJJMGMIRX EMV GMVGYPEXMSR IWTIGMEPP] EX XLI FEGO SJ XLI ETTPMERGI % QMRMQYQ WTEGI
of 50mm is recommended at the sides and top of the appliance (no enclosed cupboards...),
LEZI E JPEX WXEFPI ERH WXVSRK WYTTSVX JMVQP] JM\IH XS XLI [EPP 3R MXW VIEV WIGXMSR ]SYV ETTPMERGI LEW E [EPP
fastening system. We recommend that you fasten the appliance to the wall to prevent it from tipping over.
FI WYTTPMIH [MXL TS[IV WXERHEVH SYXPIX : SV : HITIRHMRK SR XLI GSYRXV] SJ YWI
IEVXLIH [MXL GMVGYMX
breaker and protected by a fuse. (*in case of doubt, check the information plate).
- Adjust the rear feet of the appliance, to level it (use of a spirit level recommended).
- Unwind the hose which is located at the back of the appliance and leave in place until connecting up the appliance.
- Wait 48 hrs before plugging in your Vin au Verre.
When moving or installing the appliance, never tilt it more than 45°.
If flush-fitting the appliance, observe the following instructions
Mini 50mm
VOV 3 manual
Aération
Mini 50mm
Mini 50mm
5 - INSTALLATION
VOV 3 electronic
Aération
Mini 50mm
GB
-5-