OHAUS 5000 Serie Manual De Instrucciones página 30

EN-24
4.6.2 Totalization
Totalization measures the cumulative weight of a sequence of items.
To enter the Totalization mode, press and hold the Mode button until Total is
displayed.
After selecting Totalization mode, [clr.Acc] is shown on the display.
Pressing the YES key clears the Accumulating data.
Pressing the NO key advances to the Totalization mode and future
accumulation will be based on the stored accumulating data, and [0] is
displayed.
Note: If Print is "on" the zero is not printed.
To accumulate sample weight put samples on the pan and press the
Function/Mode button to add current weight on the result.
Clear the pan after current weight has been added, to be able to do the next
accumulation.
Display accumulated data:
To display the accumulated data, with no weight on pan press Function/Mode
key once. The display blinks while showing the number of samples & total
weight.
Pressing the ZERO key zeros the display if required (without affecting the stored
total value).
Exit / Clear Totalization
Long press the Function/Mode key to scroll through the modes.
4.6.3 Dynamic
Use this application to weigh an unstable load, such as a moving animal.
Three different modes are available:
OFF
= the mode is turned off.
mMAN
= averaging and resetting are initiated manually by pressing the FUNCTION key.
SEmMI
= averaging is automatically initiated when the display is stable; resetting is initiated by
pressing the FUNCTION key.
AUtO
= averaging is automatically initiated when the display is stable; resetting is
automatically initiated when the weight on the display is <= 1 divisions.
To enter the Dynamic mode, press and hold the Mode button until Dynam is displayed.
See section 3.6.3 for more information about settings.
CATAPULT 5000 SERIES SCALES
dyNAmM