Definition Of Signal Warnings And Symbols; Safety Precautions - OHAUS 5000 Serie Manual De Instrucciones

CATAPULT 5000 SERIES SCALES
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the Catapult 5000 indicator.
Please read this manual completely before installation and operation.
1.1

Definition of Signal Warnings and Symbols

Safety notes are marked with signal words and warning symbols. These show safety issues and warnings.
Ignoring the safety notes may lead to personal injury, damage to the instrument, malfunctions and false
results.
Signal Words
CAUTION
Attention
Note
Warning Symbols
General Hazard
1.2

Safety Precautions

For safe and dependable operation of this equipment, please comply with the following safety
precautions:

Verify that the local AC power supply voltage is within the input voltage range printed on the AC
adapter's ratings label.

Only connect the AC adapter to a compatible grounded socket.

Position the instrument such that the AC adapter can be easily disconnected from the socket.

Position the power cord so that it does not pose a potential obstacle or tripping hazard.

Operate the equipment only under ambient conditions specified in the user instructions.

Do not operate the equipment in hazardous or explosive environments.

Disconnect the equipment from mains power before cleaning or servicing.

Service should only be performed by authorized personnel.
For a hazardous situation with low risk, resulting in damage to the device or the
property or in loss of data, or injuries if not avoided.
For important information about the product
For useful information about the product
Electrical Shock Hazard
EN-1