NOTICE: Pressing and holding the STAINS button automatically runs through the set type of
stains.
The duration of the wash cycle varies according to the type of soiling selected.
-
Before the first wash
All washing machines are tested before leaving the factory under strict quality control.
-
This process involves running several wash cycles. As a result, a small amount of water
may remain in the drum and drainage system. Run a Drum Clean cycle without laundry to
clean the system before your first load of laundry.
First add 1 or 2 tablespoons of detergent to compartment I of the detergent dispenser.
-
Then run the Drum Clean cycle.
Wait for the cycle to finish.
-
Empty every pocket
Coins, paper clips, etc. may damage the laundry and the components of the washing
-
machine.
-
Fabrics may be damaged during the washing cycle and the fragments must be removed
manually afterwards.
Close all zips, buttons, and hooks. Tie all straps or belts.
-
Put smaller garments (e.g., nylon stockings, belts, etc.) and garments with hooks (e.g.,
-
bras) in a cloth bag or pillowcase with a zip. Remove the rings from the curtains or place
the curtains in a cloth bag together with the rings.
Type of fabric/label symbol
Cotton, mixed fibres, easy care/synthetics, wool, hand wash items.
-
Colour
-
Separate coloured and white items. Wash new coloured garments separately.
-
Size
-
Wash items of different sizes in the same wash to improve the washing efficiency and the
-
distribution of items in the drum.
Delicate garments
-
Wash delicates separately; they require gentle treatment.
-
Using the washing machine
1. Load the laundry
Open the door and insert the laundry into the drum. Load the items one at a time without
squeezing them or overfilling the drum, place them evenly. Please note the load sizes
indicated in the "Washing cycle table". Overloading of the machine will result in non-optimal
washing and wrinkled laundry.
BOLERO DRESSCODE 10800 INVERTER A/ STEEL A
ENGLISH
117