TWINCA ES-500 Manual De Operaciones página 46

1. Tiller: The two tillers can be operated individually, and the machine can therefore be driven with both left and
right hand. The tiller grips provide a step-less adjustment in speed, they are pushed up to drive the machine
forward, they are pressed down to drive the machine backward. The maximum speed is 6 km/h. To stop the
machine, release the tiller.
2. Dump bed up/down: This switch controls the functions of the dump bed, up and down.
3. Scissors up/down: This switch controls the scissor lifting function, up and down. NOTE The machine is pro-
grammed to a top speed of 2.5 km/h when the scissors are lifted from the neutral position.
4. Speed limiter: This button reduces the speed of the machine to 2.5 km/h.
5. Horn: This button allows the operator to signal any danger. It sounds during the time the button is held down.
6. Emergency stop: Emergency stop breaks the electrical circuit and switches off the machine completely. To
restart the machine, turn the key again.
7. Belly Button: This button reverses the driving direction during the time it is held down. The machine stops
when the button is released. This button is activated if the control handle is adjacent to the operator or is
otherwise activated. Belly Button is not an emergency stop and does not turn off the machine.
Driving with the machine
The machine is 100% electrically driven, and therefore has step-less speed adjustment and can drive up to 6
km/h in both directions. When stopping the machine release the tiller. The machine's parking brake is activated
and deactivated automatically. Always walk with the front and face in the same direction as when driving, and
never drive with the machine when the scissors are lifted, or the dump bed is tipped.
Maintenance and servicing
If in doubt contact your dealer, service workshop or Twinca A/S.
We recommend that all service be performed by the dealer where the machine was purchased or by other
specialized personnel with a relevant craftsmanship background who possess the maintenance instructions. If
you want to carry out service or repairs yourself, please contact Twinca A/S for the maintenance instructions.
Before working with the engine, hydraulics or servicing install the safety brackets. The safety brackets are
included and can be found under the dump bed. Mount the safety brackets over the hydraulic pistons before
working on the machine.
When servicing the machine under normal conditions. Always make sure to use the supplied safety brackets.
TWINCAES5008001-EN 42