Publicidad
Idiomas disponibles
Idiomas disponibles
You have just acquired a new XDC-50 coolant drainer, called the SAMX'DRAINER ®. Please read this manual
carefully before using your equipment for the fi rst time. This manual contains all the information that will
carefully before using your equipment for the fi rst time. This manual contains all the information that will
allow you to familiarise yourself with your equipment and use it quickly and eff ectively.
allow you to familiarise yourself with your equipment and use it quickly and eff ectively.
Thank you for the trust you have placed in us.
NEVER THROW THIS DOCUMENT AWAY:
KEEP IT CAREFULLY! MAKE SURE THIS DOCUMENT
IS READ BY THE END USER!
SAFETY PRECAUTIONS
Chis equipment is not intended for use by anyone
(including children) with reduced physical,
sensory or mental capacities, or by people with no
experience or knowledge of the equipment except
if they are supervised by a safety supervisor,
or have benefi ted from prior training on how
to use it. Care should be taken to ensure children
do not play with the equipment. The equipment
must not be subjected to impacts. This equipment
is designed to drain coolant only. The guarantee
will no longer apply if any liquid other than coolant
is introduced into it.
CAUTION : Dispose of the used coolant in line with
the applicable regulations.
WARNING : There is a risk of coolant being splashed
onto people close to the equipment. The equipment
must be connected to a compressed air network
at a pressure comprised between 6.5 bar min.
and 10 bar max. The equipment must be used
in a temperature range comprised between
-20°C and + 40°.
12 / 124
Acoustic power level of approximately 51 dB (A).
The equipment is designed for use indoors
and without being exposed to the rain. Move the
equipment on its castors, using the handle. Do not
lift it with a sling or pallet truck. The equipment
must be used in the upright position placed on a fl at
fl oor, as shown in the photograph above.
When stationary, apply the brakes on the two
wheels. Before using the equipment always put
on your PPE > nitrile-type gloves + protection
goggles. Do not open the equipment, or replace any
components other than the cone and caps (refer to
the Cap replacement procedure). The equipment
may only be used to drain coolant.
If you have to destroy your drainer, drain off all
the coolant and dispose of the equipment in line
with the regulations that apply in your country.
EN
Publicidad
