Sam X'DRAINER XDC-50 Manual Tecnico página 20

IX. Spare parts
Before opening the access plate inside the machine, it is essential that there should not be any coolant in the machine.
Unscrew the three M4 screws shown in the diagram. Pull out the upper part, remove the two pipes connected to this plate and remove
it completely.
Caution, if internal parts of the equipment have to be replaced they must only be ordered via SAM OUTILLAGE' s
Technical Assistance Department. Screw M4.
X. Guarantee
The guarantee covers all faults and manufacturing defects for 12
months from the date the product was purchased (parts and labour).
The guarantee does not cover abnormal wear, incorrect pneumatic
connections, loss, theft, or damage resulting from inappropriate use,
disassembly or any other transport-related problem.
Please do not replace a component yourself during the equipment's
guarantee period, otherwise the product will no longer be covered by
the guarantee. Any addition or replacement of parts or accessories
with parts not manufactured by SAM will terminate the guarantee.
XI. Declaration of conformity / EC
We the undersigned:
SAM OUTILLAGE
10 rue Camille de Rochetaillée - cs 10528
42007 St-Étienne cedex 1 - France
Declare that the new products defi ned by:
Make: SAM
Description: SAMX'DRAINER ®.
Coolant drainer
Reference: XDC-50
20 / 124
The guarantee does not cover the normal wear of parts (eg: pipes,
tanks, castors, etc.).
In the event of failure, please return the equipment
to the Technical Assistance Department:
SAM Outillage – SAT
60 boulevard Thiers, 42000 Saint Etienne - FRANCE
Phone +33 (0)4 77 922 584 - E-mail : satminute@sam.eu
To which this declaration refers comply with SAM specifi cations
and the following standards and/or European Directives:
Machine Directive 2006/42/EC
Issued in Saint-Etienne, on Friday 19 October 2018.
Didier DENIZOT
Quality Manager
EN
El Bachir BOUBAKRI
Industrial Designer