Sam X'DRAINER XDC-50 Manual Tecnico página 15

00
THE VEHICLE MUST BE STATIONARY,
WITH ITS ENGINE OFF AND COLD
Coolant at room temperature.
>
03
INSTALL THE UNIVERSAL ADAPTER INSTEAD OF THE
CAP ON THE EXPANSION TANK
Check that the cone is airtight and the pipe is immersed as deeply as possible
>
in the expansion tank.
CONNECT THE DRAINER TO THE
01
WORKSHOP'S COMPRESSED
AIR NETWORK
Connect the drainer to the workshop's compressed
>
air network using the male port located on the front
of the equipment. The supply pressure must be
comprised between 6.5 bar and 10 bar.
04
CONNECT THE DRAINER TO THE ADAPTER WITH
THE SUCTION PIPE
02
REMOVE THE CAP FROM
THE EXPANSION TANK
EN
15 / 124