Publicidad
Idiomas disponibles
Idiomas disponibles
8 20->P020D
28
Installation Guide
WARNING
This installation information is designed for experienced installers and is not in-
tended for non-technical individuals. It does not contain warnings or cautions of po-
tential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than qualified in-
staller could cause damage to the electrical system and could result in serious per-
sonal injury or death.
O Installation Hardware
wo. [em
[pagana
Mounting collar
Sr
Pere Le
@) | Tapping screw
1
pS (5 mm x 16 mm)
$
Mounting bolt (5 mm)
O
1
eq)
A
O"
Removable face plate | ¢
case
A
pes
a"
O A Overview
=
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please
refer to the
"WARNING"
statement
above.)
o Identify and label the car wires.
o Connect the car wires to the wires of the power
connector.
o Install the unit in the dashboard.
o Check the operation of the unit.
|
CO5DE801/DFX701/DF601U
|
If you encounter problems, please consult your
nearest professional installer.
Caution:
o This unit operates with a 12 V DC negative
ground auto battery system only. Do not at-
tempt to use it in any other system. Doing so
could cause serious damage.
Before you begin installation, look for the items
which are packed with your unit.
e Warranty Card...Fill this out promptly.
e Panasonic
Servicenter for Service
Directory
. Keep for future reference in case the product
needs servicing.
e Installation Hardware...Needed for in-dash in-
stallation.
A Required Tools
You'll need a screwdriver, a 1.5 V AA battery, and
the following:
12 V DC
Electrical
Side-cut
Test bulb
tape
pliers
Les
© Dashboard Specifications
Thickness
Min. %e" (4.75 mm)
—||— Max. 2" (5.56 mm)
ie
53 mm)
77"
a
e
Publicidad
