Publicidad
Idiomas disponibles
Idiomas disponibles
O Installation Procedures
First complete the electrical connections, and
then check them for correctness. (=> pages
34-37)
Insert mounting collar C) into the dashboard, and
bend the mounting tabs out with a screwdriver.
Make sure that the lock lever {x} is flush with the
mounting collar @) (not projecting outward).
Lock lever (3x)
EF ves lever (x)
Mounting tabs
©) Mounting bolt
Secure the rear of the unit.
After fixing mounting bolt 6) and power connector
©), fix the rear of the unit to the car body by either
method (a) or (b) shown below.
insert trim plate (8).
After installation, reconnect the negative © bat-
tery terminal.
pe
(a) Using the rear support strap ©
(b) Using the rubber cushion (option)
Fire wall of car
(4) Tapping screw
(5 mm@ x 16 mm)
3 mmg
(2 Hex. nut
(5 mm)
|
|
Rear support bracket
Rubber cushion (option)
(provided on the car)
Rear support
strap
© Mounting bolt
(5 mm@)
®© Mounting collar
© Mounting boit
(5 mm)
@ Mounting collar
|
CO-DE8O1/DEX701/DE601U
|
A
Publicidad
