Publicidad
Idiomas disponibles
Idiomas disponibles
B 20-902
Electrical Connections
Cautions:
e This product is designed to operate of a 12 V, negative ground battery system.
e To prevent damage to the unit, be sure to follow the connection diagram below.
e Remove approx. Y" (5 mm) of protective covering from the ends of the leads before connecting.
e Do not insert the power connector into the unit until the wiring is completed.
e Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
and keep cable terminals free from touching any metal parts.
e Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.
A Wiring Diagram [GE |
AE Um
IS
fal
Q
[HA |
A
Antenna
La D
a
">
Ia
CD changer control connector
Antenna contro! lead
=———————
To the auto antenna control
power lead of the car. (Max. 500 mA)
A
(Bluefwhite stripe)
Dual CD changer control lead <=
C
Note:
e Insulate the dual CD changer control lead with
vinyl tape when you do not connect it.
External amplifier control power lead + CT
To an external amplifier.
(Blue)
|
Registor (1 KQ)
ACC power lead —
D
A
E]
(Brown/white stripe)
To ACC power, +12 V DC.
(Red)
Fuse (15 A)
Battery lead. —.
— 53H
BAOTERVISA]
To the battery, continuous +12 V DC.
(Yellow)
Ground lead
<—
To a clean, bare metallic part of the car chassis.
(Black)
|
CO;DF801/D0EX701/DK601U
|
Publicidad
