Publicidad
Idiomas disponibles
Idiomas disponibles
--r
4
:
3,7
The Al edit recording
function
enables
CD recording
without
worrying
about
tape
length
and track
length.
When
a CD is
inserted,
the unit automatically
calculates
the total track length.
If necessary,
the order of tracks is rearranged
so that no track is
cut short.
(Al: Artificial
Intelligence)
m
Al edit recording
will not start from a point halfway
into the tape.
The tape must be recorded
from the beginning
of either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit,
Press CD and load the disc(s).
Press EDIT/CHECK
once while pressing
SHIFT
on the remote control.
"EDIT
appears,
EDIT
When
"PRGM"
is displayed,
press
EDIT/CHECK
pressing SHIFT again,
while
Press DISC DIRECT PLAY 1-3 to select a disc.
Press
numbered
buttons
O-9 on the remote
control to designate
the tape length.
10 to 99 minutes
can be specified.
Example:
When using a 60-minute
tape, press 6 and O.
In a few seconds,
the tracks to be recorded
on each side of
the tape are determined.
+,
-
or
MULTI JOG are also available to designate
the tape length.
Tape length
Remaining
time
Programmed
of recording
tracks for side A
6 Press
REC/REC
MUTE to start recording
on
the first side.
The tape is rewound
to the beginning
of the first side, the
lead segment
is played through for 10 seconds,
and recording
starts. When the last track programmed
for side A is finished,
deck 2 enters
the recording
stop mode. After entering
the
recording
stop mode, go to step
7.
7
Press EDIT/CHECK
while pressing SHIFT on the
remote
control
to display
the program
for the
second recording.
"B" is displayed.
8 Turn over the tape in deck 2 and press O REC/
REC MUTE to start recording on the second side.
To stop
recording
Press
. Recording
and CD play stop simultaneously,
To clear the edit program
Press
CLEAR
twice so that "EDIT
disappears
on the display.
To check the order of the programmed
track numbers
Before
recording,
press EDIT/CHECK
while pressing
SHIFT on
the remote control to select side A or B, and press <
or ~
repeatedly.
Programmed
Track number
track numbers
Program
number
To add tracks "from other discs to the edit program
If there is any time remaining
on the tape after step 5, you can
add tracks from other discs in the CD compartment
1
Press
EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B.
2 Press DISC DIRECT PLAY 1-3 to select a disc.
3
Press numbered
buttons on the remote control to select tracks.
A track whose playing
time is longer than the remaining
time
cannot
be programmed.
4
Repeat
steps 2 and 3 to add more tracks.
Time on cassette tapes and editing time
The actual cassette
recording
time is usually
a little longer than
the specified
recording
time printed
on the label.
This unit can
program
tracks to use the extra time.
When the total recording
time is a little longer
than the tape's
specified
recording
time
after editing,
the display
shows the extra time (without
a minus
mark), instead of the time remaining
on the tape (with the minus
mark),
The
Al edit
recording
function
cannot
be used
with
discs
containing
31 tracks or more.
'
CD EDIT/CHECK
on the unit is also available
instead
of EDIT CHECK
on the remote
control.
Tape side
A: First recording
side
B: Second
recording
side
ENGLISH
14
Publicidad
