Publicidad
Idiomas disponibles
Idiomas disponibles
l.
—._
_
a
5
3,7,8,9
E ;
4,5
c)=;~
3,7,8,9
o'
In the programmed
edit recording
function
the tracks
can be
programmed
while checking
the remaining
time on each side of
the tape.
m
The programmed
edit recording
will not start from a point halfway
in the tape. The tape must be recorded
on from the beginning
of
either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit.
Press CD and load the disc(s).
Press EDIT/CHECK
twice while pressing
SHIFT
on the remote control.
"EDIT" and "PRGM"
appear.
When "AI" is displayed,
press EDIT/CHECK
while pressing
SHIFT again.
Press numbered
buttons on the remote control
to designate
the tape length.
10 to 99 minutes
can be specified.
c The +,
-
or MULTI JOG are also available
to designate
the tape length.
Tape length
Tape side A (front side)
Maximum
recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered
buttons O-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then
press +10
and O.
Remaining
time
Programmed
on
side A
tracks
6
7
8
9
Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining
time
cannot
be programmed.
Press EDIT/CHECK
while pressing SHIFT on the
remote control to select side B and program the
tracks for side B.
After confirming
"Bon
the display,
repeat step 5.
Tape side B (reverse
side)
I
Press
EDIT/CHECK
while
pressing
SHIFT
to
select side A and press
REC/REC
MUTE to
start recording.
CD play and recording
of edited tracks for the first side start
simultaneously.
When the last track programmed
for side A
is finished,
deck 2 enters
the recording
stop mode.
After
entering
the recording
stop mode, go to step 9.
Press EDIT/CHECK
while pressing SHIFT on the
remote control for recording of the second side.
"B" is displayed.
10 Turn over the tape in deck 2 and press
REC/
REC MUTE to start recording.
Recording
starts.
To stop recording
Press
. Recording
and CD play stop simultaneously.
To
check the order of the programmed track numbers
Beforerecording, p ressEDIT/CHECK while pressingSHIFT on
the remotecontrolto selectsideA or B, and press-
or *
repeatedly.
Disc number
Track number
Program
number
Tape side
Programmed
track
numbers
To change the program of each side
Press EDIT/CHECK while pressing SHIFT on the remote control
to select side A or B, and press
CLEAR
to clear the program
on the selected
side. Then program
tracks again.
To clear the edit program
Press
CLEAR
twice so that "EDIT" disappears
on the display.
' CD EDIT/CHECK
on the unit is also available
instead
of EDIT CHECK
on the remofe
control.
7 ~
ENGLISH
Publicidad
