Publicidad
Idiomas disponibles
Idiomas disponibles
RADIO
RECEPTION
1
2
Press TUNER
BAND
repeatedly
to select
the
desired band.
~FM—
AMT
When
TUNER
BAND
is pressed
while the power
is off, the
power is turned
on directly.
To
select a band with the remote control
Press
BAND while pressing SHIFT.
Press
<
DOWN
or >
UP to select
a station.
Each time the button is pressed,
the frequency
changes.
When a station is received, "TUNE" is displayed
for 2 seconds,
During
FM stereo reception,
(I(O)}] is displayed,
[(1011]
TUNE
To search for a station quickly (Auto Search)
Keep -
DOWN or *
UP
pressed
until the frequency
starts
to change
rapidly.
After tuning
in to a station,
the search stops.
To stop the Auto Search manually,
press+
DOWN or -
UP.
The Auto Search may not stop at stations with very weak signals.
When an FM stereo broadcast contains noise
Press MONOTUNER
on the remote control while pressing SHIFT
so that "MONO"
appears
on the display.
MONO
Noise is reduced,
although
reception
is monaural.
To restore stereo reception,
press these buttons so that "MONO"
disappears.
To
change the AM tuning interval
The default setting of the
AM tuning
interval
is 10 kHz/step.
If
you use this unit in an area where the frequency
allocation
system
is 9 kHz/step,
change
the tuning
interval.
Press
POWER while pressing TUNER BAND.
To reset the interval, repeat this procedure.
0-9,+10
BAND
SHIFT
The unit can store a total of 32 preset stations. When a station
is
stored, a preset number is assigned
to the station.
Use the preset
number
to tune in to a preset station
directly.
1 Press TUNER BAND to select a band, and press
<
DOWN or >
UP to select a station.
2 Press II SET to store the station.
A preset
number
beginning
from 1 in consecutive
order for
each band is assigned
to the station.
Preset number
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already
been stored.
PRESET NUMBER TUNING"
'"
Use the remote control to select the preset number
directly,
1
2
Press BAND while pressing
SHIFT to select a
band.
Press numbered
buttons O-9 and +10 to select a
preset number.
Example:
To select preset number
20, press +10, +10 and O.
To select preset number
15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER f3AND to select a band.Then, press 4>
PRESET
repeatedly
or turn MULTI JOG,
Each time
> PRESET
is pressed,
the next ascending
number
is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
CLEAR, and press II SET within
4
seconds,
The preset numbers
of all other stations
in the band with higher
numbers
are also decreased
by one.
When the AM tuning
interval
is changed,
all preset stations
are
cleared.
The preset stations
have to be set again.
ENGLISH
~
Publicidad
