Inserting batteries
Detach
the battery
cover on the rear of the remote
control
and
insert two R6 (size AA) batteries.
R6(AA)
When to replace the batteries
The maximum
operational
distance
between
the remote
control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace
the batteries
with new ones.
To
use
SHIFT on the remote control
Buttons
@ have two different
functions.
One of these functions
is indicated
on the button,
and the other on the plate above the
button.
To use the function
on the button,
simply press the button.
To use the function on the plate above the button, press the button
while pressing
SHIFT.
To use FUNCTION on the remote control
The FUNCTION substitutesforthe function buttons(TAPE DECK
1/2, TUNER, VIDEO/AUX, CD, MD)
on the main unit.
Each time
FUNCTION is pressed, the next function is selected
cyclically.When tapes are inserted
in both decks, each deck is
selected
with
FUNCTION.
<>/F
PRESET on the remote control
The function
is same as that of 4>
on the main unit.
@
SHIFT
4 blb
FUNCTION
PRESET
m
If the remote
control
is not going to be used for an extended
period
of time,
remove
the
batteries
to prevent
possible
electrolyte
leakage.
The remote control
may not operate
correctly
when:
- The line of sight between
the remote control
and the remote
sensor
inside the display window
is exposed
to intense
light,
such as direct sunlight
- Other remote controls
are used nearby (those of a television,
etc.)
5
ENGLISH
1:
ii
,,
~1
,—
___
Ii. -- _——
—-i
—
\—
~
/
To turn the power on
Press
one of the function
buttons
(TAPE, TUNER,
VIDEO/AUX,
CD, MD). Playback
of the inserted
disc or tape begins,
or the
previously
tuned station
is received
(Direct
Play Function),
POWER
is also available.
When the unit is turned on, the disc compartment
may open and
close to reset the unit.
To
turn the power off
Press POWER.
Flash windows
The windows
on the top of the unit and the cassette
decks light
up or flash while the unit is being powered
on.
To turn off the light of the top window,
press
9
while pressing
CD. To turn back on, repeat the above.
Game Demo
When the AC cord is connected,
the display window demonstrates
the game Demo. When the power is turned
on, the game Demo
is overridden
by the operation
display. When the power is turned
off, the game Demo is restored.
To
cancel the game Demo
Press DEMO. To re-activate
the game
Demo,
press
DEMO
again.
To play the the game
Demo
1 Press DEMO so that the game Demo displays,
2 Press 4>,
Three numbers on the display start to run.
3 Press
once.
The number on the left side stops.
4
Press
twice to stop the remaining
two numbers.
Scoring:
20
points are given to start the game.
If all the numbers
are equal, 50 points are added to the score
If not eaual, one point is subtracted.
If the gained
points reach 9999, you win.
If the gained
points fall to O, you lose.
To
reset the game Demo
Press
DEMO twice, then press +-.
The game starts again.
During
playing
the game
Demo,
and
<E
are available
only for the game Demo, Cancel the game Demo to use these
buttons
for the functions
such as CD playing,
etc.
During
the game
Demo,
some
indicators
unrelated
with the
actual operation
light up on the display.