VONROC PD501AC Traducción Del Manual Original página 7

1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Risk of electric shock.
Rotation, left/right.
Wear hearing protection.
Wear a dust protection.
Wear eye protection.
Keep your hair away from moving parts. Tie
back long hair, be sure to wear hair
protection (hair net or cap). Long hair can
easily be caught in moving parts.
Do not wear protective gloves. Gloves may
be entangled by the rotating parts or chips
leasing to personal injury.
Dress properly. Do not wear loose clothing
or jewellery. Keep your clothing away from
moving parts. Loose clothes and jewellery
can be caught in moving parts. Instead
wear fitted clothing and tie buttons on
sleeves.
Attention: Laser radiation. Do not stare into
the beam Class 2 laser.
Class II machine - Double insulation - You
don't need any earthed plug.
WWW.VONROC.COM
The product is in accordance with the
applicable safety standards in the European
directives.
Speed diagram
rpm
2500
2000
1500
1000
500
0
1 2 3 4 5 6 7 8 9 10 11 12 13 Ø
The diagram shows the speed that should be set
(rpm) depending on the drill diameter (dia. in mm)
for the materials Steel and Wood. Note: The drill
speeds specified are merely suggested values.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos­
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while oper­
ating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
Steel Wood
EN
7