VONROC PD501AC Traducción Del Manual Original página 9

5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
ADDITIONAL SAFETY WARNINGS FOR
TRANSPORTABLE DRILLS - DRILL SAFETY
WARNINGS
a) The drill must be secured. A drill that is not
properly secured may move or tip over and may
result in personal injury.
b) The workpiece must be clamped or secured to
the workpiece support. Do not drill pieces that
are too small to be clamped securely. Holding
the workpiece by hand during operation may
result in personal injury.
c) Do not wear gloves. Gloves may be entangled
by the rotating parts or chips leading to perso-
nal injury
d) Keep your hands out of the drilling area while
the tool is running. Contact with rotating parts
or chips may result in personal injury.
e) Make sure the accessory is rotating before
feeding into the workpiece. Otherwise the ac-
cessory may become jammed in the workpiece
causing unexpected movement of the workpie-
ce and personal injury.
f) When the accessory is jammed, stop applying
downward pressure and switch off the tool.
Investigate and take corrective actions to elimi­
nate the cause of the jam. Jamming can cause
unexpected movement of the workpiece and
personal injury.
g) Avoid generating long chips by regularly inter­
rupting downward pressure. Sharp metal chips
may cause entanglement and personal injuries.
h) Never remove chips from the drilling area while
the tool is running. To remove chips, move the
accessory away from the workpiece, switch
off the tool and wait for the accessory to stop
moving. Use tools such as a brush or hook to
remove chips. Contact with rotating parts or
chips may result in personal injury.
i) Accessories with speed ratings must be rated
at least equal to the maximum speed marked
on the power tool. Accessories running faster
than their rated speed can break and fly apart.
j) Never make warning signs on the machine
unrecognisable.
WWW.VONROC.COM
k) Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could blind
somebody, cause accidents or damage your
eyes.
l) If laser radiation hits your eye, you must close
your eyes and immediately turn your head away
from the beam.
m) Do not make any modifications to the laser
equipment.
n) Do not let children use the power tool unsuper­
vised. They could accidentally blind someone.
o) If the text of the laser warning label is not in
your national language, stick the provided
warning label in your national language over it
before operating for the first time.
p) Secure the power tool on a stable, even and
horizontal surface. If the power tool can slip or
shake, the application tool cannot be operated
evenly and safely.
q) Never leave the tool unattended before it has
come to a complete stop. Cutting tools that are
still running can cause injuries.
r) Do not touch the application tool after working
before it has cooled. The application tool beco-
mes very hot while working.
s) Keep the work surface clean, including the
workpiece. Sharp-edged drilling chips and
other objects may cause injury. Material mixtu-
res are particularly hazardous. Light metal dust
may catch fire or explode.
t) Select the correct rotational speed before
starting work. The rotational speed must be
appropriate for both the drilling diameter and
the material you intend to drilled. If an incorrect
rotational speed is selected, the application tool
may become jammed in the workpiece.
u) Do not use any drills which are damaged on the
shank.
v) Check whether all the protective provisions are
in place and have been attached correctly. Do
not remove any mechanical or electrical protec-
tive provisions.
w) Check whether the drill holder is tightened
properly.
x) To remove drill chips only use hand brushes,
brushes, rubber wipers, chip hooks or similar
aids. Do not carry out any cleaning or greasing
work while the machine is in operation.
y) Store the power tool safely when it is not in
use. The storage location must be dry and
EN
9