Monogram ZHU30 Manual Del Propietário página 13

Using Your Cooktop
Induction Cooktop
Touch control
Touch the pad lightly with the flat part of your
fingertip. Touch the center of the pad to ensure
the cooktop response.
A "beep" sound can be heard with each touch
to any pad.
Cooking
elements
Each of the cooking elements have separate
ON/OFF pads and LED display,
Be sure to use cookware that meets the
minimum pan size requirements.
To turn on a cooking element:
1 Place a pan with food onto the induction element.
The pan size should match the indicator ring.
2 Touch the ON/OFF pad. "5" will flash
in the display.
3 Touch the [+) or/-) pad to select power level and
to activate the induction element. A sound will
beep.The/+) or/d pad must be pressedwithin
10 seconds to activate the element.
NOTE:You can also touch and hold the pad to scroll
quickly to the desired setting.
The induction circuit detects the pan and allows
the element to be activated. Both the element ON
indicator light and the cooktop HOTSURFACE light
will illuminate. If no power level is selected within
10 seconds, the zone will be deactivated.
To turn the control to OFF, t ouch the ON/OFF pad.
The induction element will be turned off and the
displag will be blank.
With an element control ON:
If a pan is removed or moved to off-center from the
cooking ring, the control will flash "F" along with the
power setting. After 30 seconds, the element will be
deactivated and displags will turn off.
If the pan is placed back on the zone within
30 seconds, the flashing will stop and cooking
will resume.
13