Luminance Brands Kathy ireland HOME CURVA SKY LED INDOOR Manual Del Propietário página 12

5.8
Remove and retain one of the four M5 x 10 mm Pan
Head Ceiling Cover Screws and Split Washers in the
Ceiling Mounting Plate .
Loosen the remaining three M5 x 10 mm Pan Head
Ceiling Cover Screws and Split Washers (Figure 17) .
Unhook the Fan Motor Assembly from the Ceiling
Mounting Plate Hook and lift the Fan Motor Assembly
up to the Ceiling Mounting Plate .
Align and engage the Fan Motor Assembly slots with
the three Screw heads previously loosened by rotating
the Fan Motor Assembly to engage the Screw heads
and all three slots .
NOTE: Careful to capture both the M5 x 10 mm Pan
Head Ceiling Cover Screws and Split Washers on
the outer side of the Fan Motor Assembly.
Reinstall the previously removed M5 x 10 mm
Pan Head Ceiling Cover Screw and Split Washers
(Figure 17) .
Completely tighten all four M5 x 10 mm Pan Head
Ceiling Cover Screws and Split Washers .
A spare M5 x 10 mm Pan Head Ceiling Cover Screw
and Split Washer is supplied in parts bag, if needed .
5.9
Position the Ceiling Trim Ring over each of the
protruding M5 x 10 mm Pan Head Ceiling Cover
Screw Heads and rotate the Ceiling Trim Ring counter-
clockwise to secure (Figure 18) .
12
U.L. Model No.: CF145L & CF153L