Luminance Brands Kathy ireland HOME CURVA SKY LED INDOOR Manual Del Propietário página 6

3. Ceiling Fan Assembly
3.4
Remove one of the three M4 x 10 mm Pan Head
Screws in the Lower Housing and loosen the remaining
two screws .
Retain the M4 x 10 mm Pan Head Screw for future use .
Tuck wires into the LED Light Fixture Assembly and
position in the Lower Housing Assembly .
Position the LED Light Fixture Assembly into the
Fan Housing by placing the cut out notches over the
Fan Housing Dimples (Figure 4) .
NOTE: Make sure wires and terminals are
positioned under the LED Light Fixture Assembly
and not pinched between LED Light Fixture
Assembly and Lower Housing.
3.5
Rotate the LED Light Fixture Assembly clockwise on
the Lower Housing by engaging the two loosened
screws onto the key hole slots (Figure 5) .
Secure the LED Light Fixture Assembly by tightening
the two M4 x 10 mm Pan Head Screws .
Reinstall the M4 x 10 mm Pan Head Screw that was
previously removed .
A spare M4 x 10 mm Pan Head Screw supplied in parts
bag, if needed .
You have now completed the initial assembly of your
new ceiling fan . You can now proceed with hanging and
wiring your fan .
(Continued)
M4 x 10 mm PAN
HEAD SCREW
Figure 4
Figure 5
6
LED LIGHT
FIXTURE
ASSEMBLY
CUT OUT
NOTCHES
DIMPLES
KEY HOLE
SLOT (2)
LOWER
HOUSING
M4 x 10 mm PAN HEAD SCREW
LED LIGHT FIXTURE
ASSEMBLY
LOWER
HOUSING
U.L. Model No.: CF145L & CF153L