SHERCO BIKEN Manual Del Usuario página 47

ADJUSTING YOUR BIKE
CAUTION
If the seat post insertion depth is not respected, there is a risk of bending and breaking, which could lead to loss of control and a fall. Pay
particular attention to this during installation. Do not extend the seat tube beyond the "MIN. INSERT" mark engraved on it.
Another setting is the saddle tilt. You can adjust this setting by adjusting screws [A] and [B] on the underside
of the saddle, allowing you to tilt it up or down.
NOTE
As a basic rule, the saddle is initially positioned horizontally.
CAUTION
Make sure to comply with the tightenning torque given to the "settings and basic values" table
B
A B
A
&p. 62).
(
47