hillvert HT-MD-300A Manual De Instrucciones página 106

Always release the clutch control lever before changing speeds. Failure to do so will result in damage
to the power trackbarrow.
Slower speeds are for heavier loads, while faster speeds are for transporting light loads or an empty
hopper. It is recommended that you use a slower speed until you are familiar with the operation of the
power trackbarrow. If the engine slows down under a load or the tracks slip, shift the machine into a lower
gear. If the front of the machine rides up, shift the machine into a lower gear. If the front continues to ride
up, lift up on the handles.
Left/Right Steering Lever
Operate the lever to turn left/right.
Operate the steering levers only at a reduced speed.
Hydraulic Tipping Handle
Using your left hand pull the locking plate up to release the tipping handle, and hold in position.
To raise the hopper, pull the tipping handle upwards until the hopper has reached the desired position . To
stop raising the hopper, simply release the tipping handle and return the locking plate to its original
position. To lower the hopper, first pull the locking plate up with your left hand to release the tipping
handle, and then pull the tipping handle down with the right hand. When the hopper is lowered to the
original position, release the tipping handle back to its original position and lock securely with the locking
plate.
EN