Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4. Move the throttle lever slightly to the FAST speed.
5. Pull the recoil starter until the engine starts. Return the recoil to the home position after each pull.
Repeat the steps as needed. Once engine has started, set the throttle to the FAST position before you
operate the unit.
Rapid retraction of the starter cord (kickback) will pull your hand and arm toward the engine faster
than you can let go. Broken bones, fractures, bruises, or sprains could result.
Operating
After the engine warms up, move the throttle lever to accelerate engine speed.
Engage the required gear and slowly squeeze the clutch control lever. If the gear does not engage
immediately, slowly release the clutch lever and try again. In this way the power trackbarrow will start
moving.
Publicidad
