hillvert HT-MD-300A Manual De Instrucciones página 148

Carretilla con motor dumper
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 499
EN
3. Measure the track midline vs. the horizontal line. The reading must not be more than 10cm~15cm.
If the distance is greater, proceed as follows.
1. Use the tipping handle to tip the hopper and set it on blocks or supports rated for the weight of the box.
2. Loosen locknut A.
3. Tighten bolt B until the correct tightness is restored.
4. Secure bolt B by tightening locknut A thoroughly.
5. Return the hopper to its original position.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ht-md-500bHt-md-500c

Tabla de contenido