Look Keo Blade Manual página 25

SIDE VIEW
1: Radius of curvature: The curve radius of
LOOK cleats is 150mm at the shoe contact point.
. It is important that the soles of the shoes that
are used with these cleats have the same radius
of curvature. If the radius of curvature of the sole
is different, the shim deforms when fixed and this
may result in a a bad hold.
Check the curvature of the sole of your shoes in
advance at a LOOK autorized retailer who has a
tool for verification. We recommend a radius of
curvature of 150mm. Above 170mm we recom-
mend the use of KEO SPACERS for low curvature
soles.
48
1. TEST YOUR OUTSOLE
1. TEST YOUR OUTSOLE
2
1
CURVED
OUTSOLE
FLAT
2. INSTALLATION
CURVED
KEO SPACER
OUTSOLE
x2
x6
FLAT
SPACER LOOK KEO
PRECAUTIONS
NO
Attention: An insufficient or too high curvature deforms the geometry of the shims, impairs
R OUTSOLE SPACER
their performance and causes play between the pedal and the shim and may cause em- Screw length delivred
with LOOK KÉO SPACER
155 NO SPACER
brittlement or malfunction of the shim which may hinder or make it impossible to release
13 mm
170 NO SPACER
the shim.
185 SPACER NEEDED
200 SPACER NEEDED
R OUTSOLE SPACER
2: Axle - pedal marker: this mark corresponds to the position of the axle of the pedal when
155 NO SPACER
the shim is engaged in it.
170 NO SPACER
185 SPACER NEEDED
200 SPACER NEEDED
SPACER LOOK KEO
PRECAUTIONS
R OUTSOLE
CURVED 155
OUTSOLE 170
185
FLAT 200
2. INSTALLATION
x2
NO OK
x6
Normal screw length delivred
with LOOK KÉO CLEAT
10 mm
NO NO
1 / Screw length impact 2 / Seat height impact to keep your position
Screw length delivred Normal screw length delivre
with LOOK KÉO SPACER with LOOK KÉO CLEAT
13 mm 10 mm
1 / With a pen, save your cleat position
1 / Screw length impact
SPACER
NO SPACER
13 m
NO SPACER
SPACER NEEDED
SPACER NEEDED
+1,5 mm
OK
2 / Remove the cleat with
49