Publicidad
Idiomas disponibles
Idiomas disponibles
IDENTIFICATION
INSTALLATION
Requirements to the air supply
The pneumatic drill works optimally at an operating pressure of 6 bar, measured at the air inlet. The
distance from the air supply to the machine has to be adjusted to the application conditions on site.
We recommend installing an oiler or a maintenance unit upstream the machine for compressed air
preparation. Use acid and resin-free lubricating oil, like SAE 5W - SAE 10W.
Attention! Do not use viscous oil.
Use an antifreeze lubricant during winter time or when the compressed air is very moist, e.G.:
- "Kilfrost"
- Or "kompranol n74".
The supplied compressed air has to be free of:
- Foreign particles,
- Humidity.
Pay attention that all hoses:
- Have a cross section being large enough,
- Do not have any restrictions or kinks,
38
Publicidad
