Ega Master 36808 Manual De Instrucciones página 47

Turn the hexagon screw driver SW 5 until the drill chuck item 8 becomes loose and pull it from the shaft
(see fig. 29 and 30).
Undo by turning
Tighten the socket head screw and put the quick-release chuck onto the shaft (see fig. 31 and 32).
Disassembling the quick-release chuck
Put a wedge with the pneumatic drill on a support. Put a second wedge on the top and drive the
quickrelease chuck off the shaft by slightly hammering. (see fig 33 to 36).
Fig.29
Fig.31
Fig.33
Fig.35
Fig.30
Fig.32
Fig.34
Fig.36
47