Publicidad
Idiomas disponibles
Idiomas disponibles
Turn the drill chuck item 8 against the opening direction (see fig.12).
Put the drill chuck key item 7 (see fig. 13) in the corresponding drillings of the drill chuck item 8 and tighten
the drill bit evenly.
When connecting the machine, ensure that the valve trigger item 2 (see fig. 13) is not actuated.
Never connect a pressurized pneumatic hose (see safety instructions for prevention of hazards caused by
pneumatic). First connect the machine and then the pneumatic supply.
Adjusting the rotation direction
Clockwise rotation
42
Turn to shut
Fig.12
Tighten
Fig.13
Fig.14
F "Forward" for clockwise
rotation
Publicidad
