- Are designed for a minimum operating pressure of 6 bar,
- Are replaced regularly at preventative maintenance,
- Have an oil resistant inner surface and an abrasion-resistant outer surface,
- Are proved and specified to be non-conductive when being used next to electric conductors.
When operating the machine in areas exposed to explosion hazards, always use antistatic hoses,
lubricating oil and antifreeze lubricants, which meet the local safety requirements.
Connecting the air supply to the pneumatic drill
Remove the locking cap from the air connection 3. Connect the pneumatic hose (not contained in the
scope of delivery).
Exhaust
Air inlet
Fig.2
STARTUP
Assembly of the handle
Fix the second handle item 10 at the side (see fig. 3 and 4).
Turn
Fig.3
Fig.4
39