Ega Master 36808 Manual De Instrucciones página 46

Mount the second handle item 9 at the opposite side (see fig. 24 and 25).
Mount the quick-release chuck
Shut the pneumatic supply and disconnect the pneumatic hose from the pneumatic drill. Wear protective
gloves when replacing the drill chuck to avoid injuries.
Open the drill chuck item 8 by turning. (see fig. 26).
Put the hexagon screw driver SW 5 through the drill chuck item 8 on the socket head
screw (see fig. 27 and 28).
46
Fig.24
ACCESORIES (NOT INCLUDED)
Turn to open
Fig.27
Fig.25
Fig.26
Fig.28