MSG Equipment MS006 Manual De Usuario página 27

4. Upon finishing testing in automatic mode, the message "AUTO TEST COMPLETE" will be
displayed.
5. Press PRINT to see the result.
6. The diagnostics result can be printed on Bluetooth printer by pressing PRINT one more time.
7. The alternator is completely tested and it can be dismounted from the bench.
The test bench is designed for long-continued operation and does not have any specific
maintenance requirements. However, a regular inspection of the equipment's technical condition
is necessary to ensure its uptime.
Points to check:
Engine operation for unusual sounds, vibrations, etc.
•
Environmental conditions: temperature, humidity, vibrations, etc.
•
Check if the power cables and "crocodile" clamps on the power cables are in good
•
condition (visual inspection).
The update procedure will require a 32 Gb USB flash drive formatted to FAT32 file system.
The update procedure is as follows:
- Download a new program version on servicems.eu under the product page MS006.
- Copy file "MS006Update.bin" to the root folder on the USB flash disk.
WARNING! There should be only one file on the USB flash disk - "MS006Update.bin".
- Turn the test bench off.
Figure 27. Message displayed when the auto test complete
7. TEST BENCH MAINTENANCE
7.1. Test bench firmware update
English
User manual
27