MSG Equipment MS006 Manual De Usuario página 7

3 – A protective cover. The cover opening will lead to the procedure emergency shutdown.
4 – Power cables for connection to the alternator.
5 – A control panel.
6 – The test bench can print the results of the autotest to an external Bluetooth printer (not
included into the supply slip).
7 – An adapter for the alternator positive terminal.
8 – A set of wires for connection to the voltage regulator of an alternator.
Main elements of the control panel (Fig.2):
1 – Touch screen: screen to output the parameters of the tested alternator and control the test
bench operation.
2 – "OFF/ON": button to turn the test bench off/on. Button "OFF/ON" is inoperative when the
"EMERGENCY STOP" button is pressed.
3 – "EMERGENCY STOP": button for test bench emergency shutdown.
4 – Adjustment knobs: to set and adjust operating parameters:
• "ELECTRICAL LOAD": knob to set electric load on an alternator (simulates vehicle power
consumers). Press the knob shortly to reset the load to zero smoothly.
• "REGULATION GC": knob to set/adjust an alternator output voltage. It is used when the
alternator is connected to the "GC" terminal. Press the knob shortly to reset the preset voltage
to the default values (13.8V).
Figure 2. Control panel
English
User manual
7