Specifications
21" CRT (20.0°/50.8 cm Viewable Image Size) Flat Square
0.25 mm (H : 0.218mm / V : 0.130mm )
RGB short persistence (Hi-EU RED) / Dark TINT
Anti-Glare, Anti-Reflective, Anti-Static coating (New AGRAS coat)
RGB analog
0.7 Vp-p (without sync. signal), 1.0 Vp-p (with sync. signal)
H/V separation (TTL level), H/V composition (TTL level),
Sync-on-green
Vertical frequency
Preset mode
250.00 MHz (typ.)
1600 dots (H) x 1200 lines (V)
/ 92 Hz, FCC class B" + CISPR 22-B, max.
1800 dots (H) x 1440 lines (V) / 71 Hz NI, FCC class A, max.
Viewable Image Size
Factory preset
14.96" x 11.22", 18.7" Diagonal **
(H x V, Diagonal)
Full scan (Typical) | 16.00" x 12.00", 20.0" Diagonal **
Display Color
Analog input, unlimited number of colors ***
Connectors
Signal
15-pin mini D-Sub connector (female pins}, BNC x 5
Power supply
CEE 22 type 3-pin connector
Input power
100 to 240VAC (50 or 60Hz)
170W typ. / < 25W stand-by, < 8W sleep mode (See page 14)
Controls
Contrast, Brightness, Degauss, Recall, Horizontal position, Horizontal
size, Vertical position, Vertical size, Pincushion, Trapezoidal,
Parallelogram, Rotation, Color temp. (9300K/6550K/User color), User
color adjustment, Display frequency, Signal level selection (0.7V/1.0V),
Input signal select (Port A/B), Horizontal moire, Vertical moire, Language
selection, Focus, Horizontal convergence, Vertical convergence
Tilt/swivel
13° up, 4° down, 90° each to right and left
Dimensions {W x H x D)
(19.9" x 19.2" x 20.4")
505 mm x 487 mm x 519 mm
Weight (monitor only)
28.5 kg (62.8 Ib.)
Approvals
UL1950, CSA 22.2 No.950, TUV/GS, NORDIC, DHHS, HC,
FCC Class B, IC-B, CE / CISPR 22-B (EN55022), VCCI Class B,
MPR II, TCO '92 / NUTEK, ISO 9241-3 (Ergonomics) / -8 (Colors),
VESA DPMS, ENERGY STAR*
1 detachable signal cable for VGA, SVGA.
1 detachable AC power supply cord.
Tilt & Swivel base attached.
Operating Instructions, Warranty card
Environmental conditions
Operating
Temperature
Humidity
5 to 90% (no condensation)
Altitude
10,000 ft
Storage
Temperature
—20 to +60°C (-4 to 140°F)
Humidity
5 to 90% (no condensation)
Altitude
40,000 ft
Windows® 95 Plug & Play
VESA DDC1/2B/2B+/2AB meets Winodws® 95 Plug á Play Requirements
Note:
«The on-screen image may flicker if the display is operated with the Vertical! freq. under 60 Hz.
* This monitor may only be used in a commercial or industrial environment at resolutions above 1,600 x 1,200 92Hz.
** Section on signal timing used, see page 15.
*** Number of colors depends on the Video Board used, memory installed, and RAMDAC (Random Access Memory
Digital to Analog Converter).
Specifications and design are subject to change without notice.
This product may be subject to export control regulations.
Weight and dimensions shown are approximate.
Dot-pitch
Phosphor
Surface treatment
Video signaling
Signal tevel
Input signals
Sync signal
Horizontal frequency
On screen display
O to 40°C (32 to 104°F)
—
E