Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble Shooting
For safety, please observe the following points.
es When trouble occurs, turn the power OFF immediately and
contact your dealer.
If smoke comes out of this unit or a bad odor or strange noise comes out, continuing
to use the unit can cause a fire or electrical shock. Turn the power OFF immediately,
unplug the power cord from the outlet and contact your dealer.
e Absolutely do not remove the rear cover.
There are parts at high voltage inside, so touching them can cause an electrical
shock. Leave inspection, adjustment and cleaning of the interior to your dealer.
e Do not put anything inside the casing.
If liquid or a foreign object should get inside accidentally, immediately turn the power
OFF, unplug the power cord from the outlet and contact your dealer. Continuing to use
the unit can cause a fire, electrical shock or breakdown of the unit.
If trouble occurs with the display unit, perform the following checks and take the
indicated action; if the trouble persists, please consult with your dealer.
"Symptom | Check | Acton |
power cord/plug
Plug the power cord into the outlet correctly.
T
power switch
Press the power switch.
signal cable
Connect the signal cable correctly.
The power saving function might | Release the power saving function by operating
have acted (if so the pilot LED
the mouse or keyboard.
will be yellow).
For additional detaiis please read the Operation
Manual of the hardware you are using.
The mode is not registered.
Perform the desired settings and then save them
by waiting 20 seconds or pressing the [1] "Exit" key.
The image is too large or too
small, or it is displaced from
the correct position.
is there something that produces | Remove the source of the magnetic field.
a magnetic field nearby?
Perform degaussing.
(Examples) Television monitor,
Make sure your cable is correct.
There is no display.
The display color is abnormal.|
another computer display unit,
Connect the signal connector correctly.
(Example) The color is
speaker, etc.; was the
Try a different orientation.
uneven or off-color.
orientation of the monitor
The image distortion and or | Perhaps changed while it was in
tilt is large.
use?
Is the image signal level correctly | Check the video signal level from the computer
adjusted?
and adjust it in the correct direction.
Is the brightness or contrast
Adjust the brightness and contrast.
clearly; the image is too dark.
down?
The screen size and position | ts the input synchronization signal | Check the video output mode from the computer,
do not change.
within the operating range?
and select a mode within the display unit operating
range.
For details, please read the Operation Manual of
the hardware you are using.
The front panel keys fail to
Are 2 or more Keys being
Operate only one key at a time.
operate.
operated at the same time?
Publicidad
